Conical measuring
2-point PMK-KE conical hole measuring heads with titanium nitride coating
measure precision diameters at a defined depth, ovality by rotating during the measurement process, and form errors in the hole.
The repeat accuracy of our 2-point measuring heads at IT 8 is < 1µ.
All Hexacon PMK´s are manufactured of high-quality tool-grade steel and treated at no extra charge with a quality-improving titanium nitride coating. TiN coating provides very good hardness, about 2200 HV, as well as corrosion resistance with very good sliding and friction characteristics. The improved service life results in high cost-effectiveness as well as protection of the measurement object. The measurement points are fabricated from coated hard metal. Diamond measuring points upon request.
A sample part and associated drawing of the workpiece is required with the order.
PMK-NO-02-KE • Precision meas. head in conical variant
ø 8-20 mm, delivered with standard X dimension of 5mm and M6x0.75 thread. Repeat accuracy at IT 8 < 1µ. The measurement range is 0.15mm and can be extended to up to 0.6mm upon request. Self-centering.
Specify Z, angle, L and conical slope when ordering.
Ordering example: øworkpiece = 18H7 = PMK-02-KE-18
|
PMK-02-KE_08-20mm |
PMK-NO-03-KE • Precision meas. head in conical variant
ø 15-40 mm, delivered with standard X dimension of 6mm and M10x1 thread. Repeat accuracy at IT 8 < 1µ. The measurement range is 0.2mm and can be extended to up to 0.8mm upon request. Self-centering.
Specify Z, angle, L, and conical slope when ordering.
Ordering example: øworkpiece = 38H7 = PMK-03-KE-38
|
PMK-NO-03-KE_15-40mm |
PMK-NO-03-KE_40-50mm |
|
PMK-NO-03-KE_50-280mm |
 |
Conical PMK-NO-KE in 2-Point-Measuring with standard X-dimension or short X-dimension are available with 6mm - 280mm ø Z!
Other sizes upon request.